Customer Benefit
① Long spanlife under rate working conditions.
② Filtration performance up to 0.01micron and residual oil up to
0.001mg/m³ in according with ISO8573.1-2010 standard.
③ Low pressure drop, saving energy and cost for ownership.
④ Colorful element top cap, Spin-on for filter, easy operate and
maintain.
Air Filter Element Feature
A. No-touch type, easy install and maintenance, save time and cost.
B. Double stainless steel support. Strength the constructionand
prevent second pollution as rusted.
C. Deep-bed Multi-wrap borosilicate fiber glass, Large flow passages
prevent high pressure drop and allow for a high dirt holding
capacity.
D. Polyester needle felt sleeve unique coalescing action to quickly
drain oil.
Element Struction
①FPM sealing ring ensures air tightness to achieve better filtering
effect.
②The double-layer support mesh is made of stainless steel to ensure
the strength of the air Filter Element. The layered filter design structure ensures the filter accuracy
of the filter element and protects the glass fiber during the
production process. At the same time, it avoids the damage of the Compressor Air Filter Element due to the rust of the material and the secondary effect of
compressed air. Sub-pollution.
③The 96% porosity has a large ability to hold dust, and the service
life can reach 6000-8000 hours. The general pressure difference is
0.17-0.25kg/cm, and the maximum is not more than 0.65kg/cm.
④The end cover is made of PA+GF material, under the pressure of
1.8Mpa, it can withstand 240℃ high temperature without deformation,
-20℃ without embrittlement, and can resist general acid and alkali
chemical corrosion, and withstand harsh compressed air environment.
⑤The high-quality special material of the outer layer of the
cartridge filter element can condense water and oil, and has strong
oleophobicity and hydrophobicity, preventing oil or water from
being brought downstream again and ensuring filtration performance.
Element Technical Specification
| Filtration Grade |  |  | | | | | |
| PF | AO | AA | AX | ACS | AR | AAR |
| Particle removal (ISO12500-3) | 5μm | 1μm | 0.01μm | 0.01μm | - | 1μm | 0.01μm |
| Outlet oil aerosol concentration (ISO12500-1) | 5mg/m³ | 0.6mg/m³ | <0.01mg/m³ | <0.001mg/m³ | <0.004mg/m³ | - | - |
| Filtration performance of Particle (ISO12500-3) | - | 99.999+% | 99.999+% | 99.999+% | 99.999+% | 99.999+% | 99.999+% |
| Filtration performance of oil (ISO12500-1) | 50% | 80+% | 99.9+% | 99.99+% | - | - | - |
| Element spanlife | 6000 hours | 6000 hours | 6000 hours | 6000 hours | 2000-3000 hours | 4000-6000 hours | 4000-6000 hours |
| Filtration Type | Coalescence | Coalescence | Coalescence | Coalescence | Adsorption | Coalescence | Coalescence |
| Airflow direction | From inside to outside | From outside to inside |
Picture of Filter Element
