Home > Stainless Steel Compressed Air Filter >

Stainless Steel Compressed Air Filter for Nitrogen Generator

Product Categories

Aluminum Compressed Air Filter [156]
Compressed Air Filter [5]
Stainless Steel Compressed Air Filter [15]
Activated Carbon Compressed Air Filter [5]
Refrigerated Air Dryers [12]
Desiccant Air Dryers [2]
Integrated Refrigerated Desiccant Air Dryer [6]
1.0Mpa Water Separators [34]
3.0Mpa Water Separators [1]
Internal Auto Drain [6]
External Auto Drain [8]
Replacement Filter Elements [22]
Differential Pressure Indicator [3]

Hongrijia Depurate Facility Science & Technology Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Stainless Steel Compressed Air Filter for Nitrogen Generator

Ask Lasest Price
Brand Name :	Yuka
Price :	Negotiable
Delivery Time :	3-7working days
Payment Terms :	L/C,T/T
Supply Ability :	300,000pcs/month

Add to Cart

Product Details
Company Profile

Stainless Steel Compressed Air Filter for Nitrogen Generator

Product Description

Most industrial compressed air applications operate at pressure 7bar, 10bar or 13bar, and purification equipment is usually designed around these working pressures. However, some application require higher working pressure, which will also lead to an increase in the concentration of pollutants.

G-BHL series stainless steel compressed Air Filters are designed to remove liquid aerosols, water, oil and sub-micron particles in the compressed air system. The filtration efficiency can be 99.99% to remove 0.01 micron particles and small droplets, improve the pass rate of the product, reduce maintenance time and costs, increase productivity and reduce production costs ultimately.

Technical Specification

The flow rate below is the treatment capacity of compressed air under rated working pressure 7 bar g (100psi g). For application in other working pressure, please refer to the correction factors.

Product Selection

Filter Element Performance


PF	AO	AA	AX	ACS	AR	AAR
As a primary filter, particles whose diameter more than 5μm can be removed, the maximum residual oil content is negligible.	High efficiency general protection, dust particles, water mist and oil mist whose diameter more than 1μm can be removed, the residual content of oil mist does not exceed 0.6mg/m³(21ºC), 1ppm(w).	High efficiency oil removal filtration, dust particles, water mist and oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.01mg/m³(21ºC), 0.01ppm(w).	Ultra-efficient filtration, dust particles, water mist and oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.001mg/m³(21ºC), 0.001ppm(w).	Dust particles whose diameter more than 0.01μm, oil vapor and odor can be removed, the maximum residual residual content of oil vapor does not exceed 0.003mg/m³(21ºC), 0.003ppm(w).	Dust particles whose diameter more than 1μm can be removed.	Dust particles whose diameter more than 0.01μm can be removed.

Stainless Steel Compressed Air Filter for Nitrogen Generator

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Hongrijia Depurate Facility Science & Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Stainless Steel Compressed Air Filter products from this supplier

Find Similar Products By Category:

Electrical Equipment & Supplies

Hot Searches: